2 Way Normally Closed PA66 Plastic Solenoid Valve 1/2'' 3/4'' 1'' 12VDC 24VDC 220VAC

2 Way Normally Closed PA66 Plastic Solenoid Valve 1/2'' 3/4'' 1'' 12VDC 24VDC 220VAC

This is a 2 way electric plastic solenoid valve that is unidirectional, therefore be sure that media only passes into the “In” port and out of the “Out” port without backpressure. Due to its normally closed configuration, the valve is closed without power. In order to open the valve, the valve must be energized and there must be a minimum pressure of 0.3 Bar to fully open the valve due to its pilot operated nature. This makes it unsuitable for a gravity feed application.

Product Features:

1. Port Size: 1/2'', 3/4'', 1'', 1-1/4'', 1-1/2'', 2''; Thread Port (G, NPT).

2. Orifice Size: 15mm, 20mm, 25mm, 32mm, 40mm, 50mm.

3. Function: 2 Way, Normally Closed.

4. Body Material: PA66 (Nylon)

5. Seal Material: NBR

6. Working Medium: Water, Liquid, Gas, Air

7. Fluid Temperatrue: -5 to +80℃

8. Voltages: 110VAC, 220VAC, 12VDC, 24VDC, other voltages can be customized.

Dimension & Data of PA66 Nylon Plastic Solenoid Valve:

Brando Factory Production of Solenoid Valves:

More Solenoid Valves for you to choose:

1. According to Body Material: Brass Solenoid Valve, Stainless Steel Solenoid Valve, Plastic Solenoid Valve

2. According to Valve Operation: Direct Acting Solenoid Valve, Semi Direct Acting Solenoid Valve, Pilot Operated Diaphragm Valve, Pilot Operated Piston Valve.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!