Airtac Type SU63 Pneumatic Air Cylinder 63mm Bore Double Acting

Airtac Type SU63 Pneumatic Air Cylinder 63mm Bore Double Acting

Sometimes referred to as pneumatic cylinders or pneumatic actuators, air cylinders are used in many industrial applications that require linear motion. Cost-effective and labor-saving, air cylinders convert energy into motion using compressed air. A host of air cylinders are available, including single-acting and long-stroke pneumatic cylinders, air actuators, double-acting pneumatic cylinders, pneumatic pistons and rodless cylinders. Review the product specifications to ensure that you’ve got the right air cylinder for the job. Also shop for cylinder mounting hardware, solenoid air control valves and manual air control valves.

Specifications of SU Series Pneumatic Cylinder:

Stroke of SU Series Pneumatic Cylinder:

Symbol of SU Series Pneumatic Cylinder:

 
Ordering Code of SU Series Pneumatic Cylinder:

Criteria for selection: Cylinder thrust:

Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3. Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5. The medium used by cylinder shall be filtered to 40μm or below.
6. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
7. The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
8. The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!