64 Lines Pulse Controller for Air Clean System Dust Collector Application

64 Lines Pulse Controller for Air Clean System Dust Collector Application

Features:

1, Adopt intergrated circuit intelligent control

2, Can adjust pulse intermission and pulse width according to the requirements.

3, Digital pipe display points etc.situation

4, According to customer requirement, can make all the power volatge and output points

5, Can be installed in the control cabinet or directly into dirt catcher

6, Strong anti-interference capacity, stable and reliable

Pulse Controller Description:
Electronic Controller for Clean Air Systems
The Pulse Controller is developed exclusively to control the cleaning of dust collector filters and incorporates advanced microprocessor technology.

Typical Applications
Used to control the pulsing of diaphragm valves in reverse jet pulse cleaning systems.

Operation principle:
Functionality
Adjustable Quantities:
Automatic / Manual modes
Number of Valves
Pulse Time (0.01 - 9.99 sec)
Manual Pause Time (1 - 999 sec)
Automatic Pause Time (1 - 999 sec)
Operating Delta-P (0.01 - 250 kPa)
Set Alarm Delta-P (0.01 - 250kPa)
Shut Down Cleaning (0 - 99 cycles)
Remote activation of the controller
Optional 4-20mA output facility
Inputs and Outputs
Inputs: Voltages Available
Inlet Outlet
230 V (±20%)-50/60 Hz 230 V-50/60 Hz
230 V (±20%) -50/60 Hz 24 V-50/60 Hz
230 V (±20%)-50/60 Hz 24 VDc
115 V (±20%)-50/60 Hz 115 V-50/60 Hz
115 V (±20%)-50/60 Hz 115 VDc
115 V (±20%)-50/60 Hz 24 V-50/60 Hz
115 V (±20%)-50/60 Hz 24 VDc
24 V (±10%)-50/60 Hz 24 V-50/60 Hz
24 V (±10%)-50/60 Hz 24 VDc
 

Datasheet of Pulse Controller:

Welcome your any question, we will response at once.

Pls e-mail to: brandon.bao@brandopneumatic.com